A practical guide to caring for your compression boots
A pressotherapy device can become a welcome part of your routine. If you own compression boots, their fit and settings may give you a comfortable massage-like experience. To keep the equipment in good condition, one detail matters: regular care.
The right care can help extend the device's life and preserve its performance, comfort and cleanliness. This guide takes you through simple steps; always check your model's instructions first.
Why care for a pressotherapy device?
Boots include air chambers, valves, tubing and inner and outer fabric. Each session exposes these parts to movement, moisture or skin products.
Without suitable care, you may notice:
-
earlier wear,
-
unpleasant odours,
-
less even inflation,
-
or avoidable faults.
A straightforward cleaning routine supports cleanliness, smooth operation and longer use when the product is used frequently.
How often should you care for your boots?
Follow the instructions supplied with your model. A practical routine may include:
-
After each session: air the boots and wipe them if needed
-
Once or twice a week: gently clean surfaces that contact skin, if permitted
-
About once a month: inspect tubing, valves and connectors
The details vary with use and product materials.
How to clean compression boots
1. Wipe the outside
Turn off and unplug the device. If the care label allows it, use a soft, lightly damp cloth on the outer surface, then let it dry before storage.
👉 Avoid:
-
abrasive products,
-
solvents,
-
and harsh alcohol-based wipes unless the manufacturer specifically allows them.
Use only products compatible with your device's care instructions.
2. Care for the inside
The lining may come into contact with skin. Consider:
-
leaving the boots open to air after each session,
-
gently wiping the inside when permitted,
-
or wearing clean, thin clothing beneath them for comfort.
Drying them thoroughly helps prevent moisture and odours.
3. Can you immerse the boots?
No, unless your specific product instructions expressly say otherwise. Most pneumatic boots should not be submerged or put in a washing machine because water can damage internal components.
Clean the surface with care and keep electrical parts dry.
Tubing and connections
The tubes carry air between the control unit and the boots.
Good habits include:
-
avoiding sharp bends,
-
disconnecting by the plug or connector, not by pulling the tube,
-
and keeping the ends clean and dry.
If a tube is damaged, stop using it and contact support rather than trying to force an even pressure through a faulty connection.
Where should you store the device?
Storage helps protect the air chambers and fabric.
A few useful habits:
-
fold or roll only as the instructions allow,
-
keep the unit in a dry place at a suitable room temperature,
-
and avoid prolonged sun exposure or damp storage.
A dedicated bag or case can protect the accessories between sessions.
Regular checks
Every so often, take a moment to:
-
look at the valves and connections,
-
check that chambers inflate as expected,
-
listen for unusual sounds,
-
and inspect zips or fastenings.
If something seems wrong, pause your sessions and ask the brand for help.
Everyday habits for longer use
-
Follow the recommended session time
-
Use pressure settings within the product instructions
-
Start with clean, dry skin
-
Let oily creams absorb and check fabric-care guidance
These small steps help preserve the equipment.
In short: simple care, comfortable sessions
Caring for a pressotherapy device should be straightforward. Regular attention supports:
-
clean accessories,
-
consistent operation and
-
a longer working life for your compression boots.
Follow your model's manual and contact Eclipse support if you notice damage or a change in how the device operates.
